8-134
SYSTEM SETTINGS►SYSTEM SETTINGS
Status Indicator Setting
The status indicator on the back of the machine lights up or blinks according to the status of the machine.
You can change this setting to specify the machine status that causes the green indicator (status indicator) to light up or
blink. The indicator goes off when Auto Power Shut-Off is enabled.
Status indicator (green) : You can specify which job status and original scanning status respectively cause the
indicator to light up and blink.
Green indicator (Status indicator) : This indicator lights up or blinks when an error occurs on the machine.
Green indicator (Status indicator) lights up and blinks the same way regardless of the pattern you select.
Status Pattern 1 Pattern 2
Green
indicator
(Status
indicator)
The machine is executing a job. Green: Light up -
The machine can accept a job. - Green: Light up
The machine is scanning an
original.
Green: Blink -
The machine is scanning an
original/processing data.
- Green: Blink
The machine is in a status other
than the above.
Green: Off Green: Off
Red
indicator
(Error
indicator)
An error has occurred but the
machine is able to be operated.
Red: Light up Red: Light up
An error has occurred and the
machine is not able to be
operated.
Red: Blink Red: Blink
The machine is in a status other
than the above.
Red: Off Red: Off
To Next Page
Loading...
