1-85
BEFORE USING THE MACHINE►LOADING PAPER
Loading paper into the bypass tray (on the machine)
1
Open the bypass tray.
When loading paper larger than 8-1/2" × 11"R or A4R, pull out the extension guide.
Pull the bypass tray extension all the way out.
Do not place heavy objects on the bypass tray or press down on the tray.
2
Adjust the bypass tray guides to the
size of paper to be loaded.
3
Insert the paper along the bypass tray
guides all the way into the bypass tray
until it stops.
Load paper with the print side facing up.
• Do not force the paper in.
• If the bypass tray guides are set wider than the paper, move the bypass tray guides in until they correctly fit the width
of the paper. If the bypass guides are set too wide, the paper may skew or be creased.
To Next Page
Loading...
