— 131 —
PLU/UPC stock
You can assign a stock quantity to each PLU/UPC code.
Shown below is an example of selecting 1 OVER WRITE.
Procedure
After selecting “1 OVER WRITE,” select a pertinent PLU/UPC code. Then
the next screen will appear to show the following items:
• CURRENT
The current stock is displayed.
• NEW STOCK (Use the numeric entry method)
Enter a new stock quantity (max. 7 digits: 1 to 9999.999)
NOTE
• If you need to add (or subtract) a stock quantity to (or from) the current
stock quantity, select 2 ADD (or 3 SUB ) and enter a value to be added
or subtracted.
• The entry of a new stock value will update to the PLU/UPC stock
counter.
Select the desired PLU code from
the PLUs list, or directly enter a
PLU/UPC code.
To Next Page
Loading...
Need help?
General
