— 201 —
Secret Code Programming
Use the following procedure to program a secret code:
Procedure
1.
In the SETTING window, select “11 SECRET CODE.”
• The SECRET CODE window will appear.
2.
Select any option from the following options list:
1 Z1: Z1 reports
2 PGM2: PGM2 operations
3 SYSTEM Z1: System Z1 reports
4 SYSTEM PGM2: System PGM2 operations
5 INITIAL D/L: Initial down-loading
6 MAINTENANCE. D/L: Maintenance down-loading
7 AUTO KEY: Auto keys
The following illustration shows those options included in the secret code programming group.
11 SECRET CODE 1
2
3
4
5
6
1 Z1 See “Z1 reports” on page 202.
2 PGM2 See “PGM2-mode operations” on page 202.
3 SYSTEM Z1 See “System Z1 reports” on page 203.
4 SYSTEM PGM2 See “System PGM2-mode operations” on page 203.
5 INITIAL D/L See “Initial down-loading” on page 204.
6 MAINTENANCE. D/L See “Maintenance down-loading” on page 204.
7 AUTO KEY See “Auto key” on page 204.
To Next Page
Loading...
