— 240 —
Backup Data Send Programming
Use the following procedure for backup data send programming:
NOTE
For more information, please consult your authorized SHARP dealer.
Backup data send
Your POS terminal can send data to another device via RS232 for the purpose of backing up its program.
Procedure
Program each item as follows:
• SEND DATA (Use the selective entry method)
Select one of the following options (data sources):
• ALL RAM • SSP
• SPEED (Use the selective entry method)
Select one of the following options (data transmission speeds):
PROGRAMMED: Sends data at a programmed speed.
38400bps: Sends data at 38400 bps.
19200bps: Sends data at 19200 bps.
9600bps: Sends data at 9600 bps.
4800bps: Sends data at 4800 bps.
2400bps: Sends data at 2400 bps.
To Next Page
Loading...
Need help?
General
