— 225 —
Positive Code File Programming
Use the following procedure for positive code file programming:
Positive code
You can create/delete the positive code.
Procedure
Program the item as follows:
• POSITIVE# (Use the numeric entry method)
Positive code (max. 16 digits)
NOTE
• You create a new code by entering the code, then pressing the
ENTER
key.
To delete a negative code, proceed as follows:
Enter the code or move the cursor to the code, and then press the DEL
key.
Select a negative code and press
ENTER
.
(Or enter the corresponding code.)
To Next Page
Loading...
Need help?
General
