— 187 —
Personnel Programming
Use the following procedure for personnel programming:
Server
Procedure
1.
In the SETTING window, select “07 PERSONNEL.”
• The PERSONNEL window will appear.
2.
Select the “SERVER”.
• The SEVER window will appear.
3.
Select the server name.
Program each item as follows:
• SECRET CODE (Use the numeric entry method)
Secret code (max. 4 digits: 0001 to 9999/0000)
• NAME (Use the character entry method)
Name for the server. Up to 12 characters can be entered.
• ENTRY (Use the selective entry method)
GLU(PBLU): Compulsory GLU(PBLU)
NON-COMPULSORY: Non-compulsory GLU(PBLU)
• G.C.COPY (Use the selective and method)
ENABLE: Enables G.C.Copy.
DISABLE: Disables G.C.Copy.
• DRAWER# (Use the numeric entry method)
Drawer number (1 or 2/0)
• NET SALES% (Use the numeric entry method)
Net sales percent rate
(max. 5 digits, 0.00 to 100.00)
To Next Page
Loading...
Need help?
General
