Sending a Fax by Automatic Dialling
30
Sending a Fax by Automatic Dialling
You can store up to 30 fax or phone numbers in the machine for automatic
dialling.
♦ Auto-dial numbers are dialled by pressing until the desired number
appears in the display, and then .
Storing fax and phone numbers for automatic dialling
START/MEMORY
1
Press once and once.
2
Press once.
3
Enter the fax or voice number by pressing the number keys. Up to 32
digits can be entered. (Note: A space cannot be entered.)
• To clear a mistake, press .
• If a pause is required between any of the digits to access a special service
or an outside line, press . The pause appears as a hyphen (two
seconds per pause). Several pauses can be entered in a row.
4
Press
SPEAKER
START/MEMORY
5
When you hear the fax tone, press . Replace the handset.
• If the transmission is completed successfully, the fax will beep once.
• If an error occurs, the fax will beep three times and print a Transaction
Report to inform you of the problem (see page 63).
Note: If the transmission is unsuccessful and DOCUMENT JAMMED appears
in the display, remove the document as explained on page 77.
START/MEMORY
Display:
ENTER FAX #
<NEW NUMBER>
all.book Page 30 Wednesday, October 27, 2004 12:42 PM
To Next Page
Loading...
