Sending a Fax by Automatic Dialling
33
2. Sending
Faxes
8
Press
9
Return to Step 2 to edit or clear another number, or press to return
to the date and time display.
START/MEMORY
STOP
Using an auto-dial number
Once you have stored a fax or phone number, you can use it to send a fax or
make a phone call.
1
If you are sending a fax, load the
document(s).
• If desired, press to set the
resolution and/or contrast.
2
Press (or ) until the name of the other party appears in the
display (if no name was stored, the number will appear).
3
If you are sending a fax, press . Dialling and transmission begins.
• If the transmission is completed successfully, the fax will beep once.
• If an error occurs, the fax will beep three times and print a Transaction
Report to inform you of the problem (see page 63).
If you are making a phone call, lift the handset. Dialing begins.
RESOLUTION
/RECEPTION
START/MEMORY
READY TO SEND
all.book Page 33 Wednesday, October 27, 2004 12:42 PM
To Next Page
Loading...
Need help?
General
