Loading the Imaging Film
14
Loading the Imaging Film
Your fax uses a roll of imaging film to create printed text and images. The print
head in the fax applies heat to the imaging film to transfer ink to the paper.
Follow the steps below to load or replace the film.
1
Remove the paper from the paper tray
and open the operation panel (press
➊).
2
Remove the used film and
empty spool.
3
Remove the two gears from the spools.
DO NOT DISCARD THE TWO GEARS!
1
2
When replacing the film,
please use Sharp
Genuine Supplies.
For the imaging film to
use, see page 1.
The initial starter roll of
imaging film included with
your fax can print about
25 A4-size pages.
If you are loading the imaging film for
the first time, go to Step 4.
all.book Page 14 Wednesday, October 27, 2004 12:42 PM
To Next Page
Loading...
Need help?
General
