68
Auto sheet feeder roller
A dirty auto sheet feeder roller may cause paper jams. Remove the paper tray
and clean the roller regularly with a clean dry cloth.
5
Flip down the green levers on each side of the white roller. Rotate the
front gear until the film is taut, and then close the operation panel (press
down on both sides to make sure it clicks into place).
The housing
Wipe the external parts and surface of the machine with a dry cloth.
Caution!
Do not use benzene or thinner. These solvents may damage or discolor the
machine.
all.book Page 68 Wednesday, October 27, 2004 12:42 PM
To Next Page
Loading...
Need help?
General
