Optional Reception Settings
44
1
Press once and once.
2
Press once and 5 times.
3
Press once.
4
Press to turn on the function, or
to turn it off.
5
Press to return to the date and time display.
STOP
1=YES, 2=NO
Changing the number for remote fax activation
If desired, you can use a number other than 5 to activate fax reception from an
extension telephone. You can select any number from 0 to 9.
1
Press once and once.
2
Press once and once.
3
Press once.
Display:
OPTION SETTING
FAX REMOTE #
ENTER (0-9) (5)
The display briefly shows
your selection, then:
CALLER-ID
Optional Reception Settings
Fax Signal Receive
Your fax will automatically begin reception if you hear a soft fax tone after
answering a call on your fax or an extension phone. If you use a computer fax
modem to send documents on the same line, you must turn this function off in
order to prevent your fax from mistakenly attempting to receive documents
from the computer fax modem. Follow the steps below to change the setting.
Display:
OPTION SETTING
FAX SIGNAL RX
all.book Page 44 Wednesday, October 27, 2004 12:42 PM
To Next Page
Loading...
Need help?
General
