Shimadzu CTO-40C CL User Manual

n Gradient mixer
The instrument can store one of the following mixers coming with a mixer detection
device.
For how to select a mixer, refer to System Guide.
Connecting a mixer detection device to the instrument requires a separate CMD cable
(150 mm).
Option Part No. Features
MIXER SUS316L ASSY
(With a mixer detection
device)
228-72654-41
The general-purpose mixer, where stainless steel
is used for the wetted part material, is intended
for both high and low pressure gradient
analysis. The capacity can switch between three
settings of 0.5 mL, 1.7 mL, and 2.6 mL.
MIXER PEEK
(With a mixer detection
device)
228-72654-42
The non-metal gradient mixer does not contain
any metal as a material in its parts that come
in contact with liquid. The capacity can switch
between two settings of 0.4 mL and 1.6 mL.
The mixer can be used for both high and low
pressure gradient analysis.
MIXER MR 20 µL
(With a mixer detection
device)
228-72652-41
The mixer is intended exclusively for high
pressure gradient analysis with high
performance and a small internal capacity of 20
μL, where stainless steel is used for the wetted
part material.
MIXER MR 40 µL
(With a mixer detection
device)
228-72652-42
The mixer is intended exclusively for high
pressure gradient analysis with high
performance and a small internal capacity of 40
μL, where stainless steel is used for the wetted
part material.
MIXER MR 100 µL
(With a mixer detection
device)
228-72652-43
The mixer is intended exclusively for high
pressure gradient analysis with high
performance and a small internal capacity of
100 μL, where stainless steel is used for the
wetted part material.
MIXER MR 180 µL II
(With a mixer detection
device)
228-72652-44
The mixer is intended exclusively for high
pressure gradient analysis with high
performance and a small internal capacity of
180 μL, where stainless steel is used for the
wetted part material.
MIXER MR 300 LPGE
(With a mixer detection
device)
228-72653-42
The high performance mixer is intended
exclusively for low pressure gradient analysis
with an internal capacity of 300 μL, where
stainless steel is used for the wetted part
material.
CTO-40C CL
5
1.3 Optional Parts
1

Shimadzu CTO-40C CL Specifications

General

Brand	Shimadzu
Model	CTO-40C CL
Category	Oven
Language	English