Shimadzu CTO-40C CL User Manual

3.1 Settings for the Basic Operation
Operating the instrument requires setting the column temperature and the upper
temperature limit to protect the columns. See the product specifications before use.
"5.1 Specifications" P.61
3.1.1 Prior to Key Operation
Touching the operation area of the operation panel displays the operation keys that
allow the user to perform key operation.
3.1.2 Temperature Control Operation
The following is an example operation procedure. The operation temperature of 55 °C
and an upper temperature limit of 70 °C are used in this example.
1
Display the initial screen (the screen
that is displayed when the power is
turned ON).
If the initial screen is not displayed,
press [CE] to display the initial screen.
2
Press [→] three times.
The [PARAMETER] setting group of the
[FUNCTION] setting group is selected and
then the [SET TEMP] screen is displayed.
3
Press [Enter].
The cursor starts blinking and activates the
numeric keypad. Now the values can be
entered.
3
Operation
CTO-40C CL
15
3

Shimadzu CTO-40C CL Specifications

General

Brand	Shimadzu
Model	CTO-40C CL
Category	Oven
Language	English