n Displaying the operation log《OPERATION LOG》
Displays ten records of previous
modifications such as password change and
parameter reset with the dates of the
modifications.
After pressing [→], press [↓] several times
to display the operation log records in
order.
The example indicates that
the password was changed on May 12, 2018.
n Displaying the error log《ERROR LOG》
Displays ten records of previous errors with
the dates of the errors.
After pressing [→], press [↓] several times
to display the error log records in order.
The example indicates that the upper
temperature limit error of error code
[0x940B] occurred on May 12, 2018.
3.5.4
Validation Support Information Group (VALIDATION)
The group allows the user to check whether the equipment is operating correctly.
n Entering date《DATE》
This allows the user to view or input the
date in this screen.
Press [Enter] and input a date in the order
of year, month, and day with the numeric
keypad.
You can change the display order of year, month, and day.
"Changing the displayed order of year, month and day《DATE FORMAT》" P.38
When the instrument is controlled by a system controller, the date is automatically
transmitted during link-up.
The date display returns to the initial value [00-00-00] when the power is turned OFF.
When the power is OFF by using (power button), the setting is not returned.
CTO-40C CL
35
3.5 VP Functions Screen
3
To Next Page
Loading...
General