2.4.1
Display Area
In this section the display on the initial screen is described.
Display Function
SET Displays the setting temperature.
ACTUAL Displays the current operation temperature in the oven.
T.MAX Displays the upper limit value of the temperature.
OVEN
When the oven temperature is in adjustment, the word [OVEN] is
highlighted.
The direct key under the display enables to start or stop the temperature
control, thus pressing it while the temperature control is stopped starts
the adjustment, and pressing it while the adjustment is activated stops
the adjustment.
READY / WAIT
Once the temperature control is completed and stabilized, the word
[READY] is highlighted.
While the temperature control is in preparation, [WAIT] blinks.
While the temperature control is stopped, nothing is displayed.
Users can change the condition to display [READY].
"Setting the temperature ready check《READY CHECK》" P.26
RUN
Highlighted during execution of a time program.
The direct key under the indicator starts or stops a time program.
DOOR
Blinks when the front door of the oven unit is opened. When the door
is open, the temperature control is paused.
When the oven temperature is 60 °C or higher, a warning
message is displayed. Closing the door clears the warning
message and resumes the temperature control.
12
CTO-40C CL
2 Parts Identification and Function
To Next Page
Loading...
General