Shimadzu CTO-40C CL User Manual

3.6.5 Starting and Stopping a Time Program
n Starting a time program
Pressing the direct key under the [RUN]
indicator highlights the [RUN] indicator
and then starts the program.
The monitoring screen allows checking how much time has elapsed after the program was
started.
"Displaying the program elapsed time《TIME》" P.19
n Stopping a time program
There are three ways to stop the program.
•
Press [RUN] again while the program is running to force it to stop.
• Use the [STOP] command to stop the program at a specified time.
• Use the [LOOP] command to stop the program after repeating it a specified number
of times.
The highlight is removed from the [RUN]
indicator and the program is stopped.
After the program is stopped, the settings are set back to the original values
before the program was started.
48
CTO-40C CL
3 Operation

Shimadzu CTO-40C CL Specifications

General

Brand	Shimadzu
Model	CTO-40C CL
Category	Oven
Language	English