n Setting the wait time to sleep mode《DISP OFF TIME》
Sets the time to elapse before the
operation panel automatically turns into
the sleep mode, when no operations are
performed on the instrument.
Input the value with the numeric keypad and press [Enter].
The setting range is from 0 to 10 (min), in which the step can be set by minute.
If 0 (min) is input, the operation panel does not turn into the sleep mode.
Setting "0" minutes causes the display screen to be always on. If the display
screen is always on, some dots frequently lighting will deteriorate in brightness
in a shorter time.
n Setting the direct key mode《DIRECT KEY MODE》
Specifies whether to display the
confirmation screen when the direct key is
operated.
Input the value with the numeric keypad
and press [Enter].
Set Value
Function
0 Displays the confirmation screen. (Initial value).
1
The relevant operation is immediately executed without the confirmation
screen displayed.
Displaying the confirmation screen helps prevent improper operations.
30
CTO-40C CL
3 Operation
To Next Page
Loading...
General