Shini SHD - Heat Duct Leak; Start-Up Time Is too Short; Honeycomb Upper and Lower Lid Leak

Shini Group
Technology & Marketing Dept
Issued by department: Date: Language: Document Name: Revision: Page:
Shini/CSC-TM 2013-11 zh-cn Shini product repair manual.doc 1.0 28 (62)
Catalog:
template:Standard_CN.dot; filename: Shini product repair manual; Printdate: 8/1/2014 1:58:00 PM; savedate: 8/1/2014 1:58:00 PM
9.3.6 Heat duct leak
Check and eliminate leak points of the heat duct and joints.
9.3.7 Start-up time is too short
View dewpoint temperature after an hour.
9.3.8 Honeycomb upper and lower lid leak
Hand to feel if honeycomb upper and lower lid silicone seal around the obvious
leak, if so, you need to replace the silicone seals.
Pic 9-6