Shini Group
Technology & Marketing Dept
Issued by department: Date: Language: Document Name: Revision: Page:
Shini/CSC-TM
2013-11 zh-cn Shini product repair manual.doc
1.0 44 (62)
Catalog:
template:Standard_CN.dot; filename: Shini product repair manual; Printdate: 8/1/2014 1:58:00 PM; savedate: 8/1/2014 1:58:00 PM
16.3.2 Carbon Brush Motor Model 119656-00
1. Remember to unplug the power to ensure that the motor is insulated.
2. The flathead screwdriver inserted into the reed slot, screwdriver force in the
direction of the arrow to release the reed. As shown in the figure below.
Pic 16-11
3. Motor protection cover is fixed to the four fixed buckle, use a screwdriver to pry
open the sides buckle fixed, (be careful not to use too much force to prevent
buckle deformation fracture), then remove the protective cover up. As shown in the
figure below.
Pic 16-12
To Next Page
Loading...
