Shini Group
Technology & Marketing Dept
Issued by department: Date: Language: Document Name: Revision: Page:
Shini/CSC-TM
2013-11 zh-cn Shini product repair manual.doc
1.0 50 (62)
Catalog:
template:Standard_CN.dot; filename: Shini product repair manual; Printdate: 8/1/2014 1:58:00 PM; savedate: 8/1/2014 1:58:00 PM
16.3.3 Carbon Brush Motor Model 122255-00
1. Remember to unplug the power to ensure that the motor is insulated.
2. Loosen and remove the screws, remove the plate.
Pic 16-21
3. Remove the carbon brush (Arrow 1 in figure), and replace a new one. Note the
small bump (Arrow 2) in the bottom of brush must block bracket recess (Arrow 3).
Pic 16-22
To Next Page
Loading...
