Shini Group
Technology & Marketing Dept
Issued by department: Date: Language: Document Name: Revision: Page:
Shini/CSC-TM
2013-11 zh-cn Shini product repair manual.doc
1.0 29 (62)
Catalog:
template:Standard_CN.dot; filename: Shini product repair manual; Printdate: 8/1/2014 1:58:00 PM; savedate: 8/1/2014 1:58:00 PM
10. Capacitive Proximity Switch Adjustment
10.1 Products Information
Our company is currently using proximity switches are IFM brand, there are two
models: KI5082-BVKG, KI0020-BBOA; KI5082-BVKG is mainly used for SGB, and
KI0020-BBOA is mainly used for VL.
10.2 Working Principle
Capacitance becomes larger because of the smaller distance between object and
probe after object close to probe, it changes the internal circuit state.
10.3 KI5082-BVKG Adjustment
Pic 10-1
1. When material position is below the proximity switch, check whether the
proximity switch tail lights, normally the light is off, if it is on, indicating that the
sensor is not adjusted correctly, then press OFF button for 6 seconds to
complete adjustment.
2. When material position is above the proximity switch, check whether the
proximity switch tail lights, normally the light is on, if it is off, indicating that the
sensor is not adjusted correctly, the press ON button for 6 seconds to
complete adjustment.
3. If the above-mentioned state can not be adjusted, please check whether the
wire is connected securely, or replace with a new proximity switch.(note: black
wire—signal wire; white wire—no connection; blue wire—connect to 24V-;
brown wire—24V+)
To Next Page
Loading...
