Shure DCS 6000 - User Manual

Other manuals for Shure DCS 6000

Questions and Answers

Rebecca EllisonAug 25, 2025

Why is there no audio in the built-in loudspeakers from some delegate or chairman units in my Shure DCS 6000 Conference System?

T
tamaramackAug 26, 2025
To solve the problem, check using the browser control in ‘CU 6110 * Audio * Audio Output * Group Setup‘ that this seat is selected in ‘Group A’. 'Group A' is always used as the source for the built-in loudspeakers. If a unit is not selected in ‘Group A’ the audio from this unit will not be heard in the built-in loudspeakers.

qmayerAug 23, 2025

What to do if the CU 6110 browser application won't open on my PC or iPad for Shure Conference System?

B
Beth AndersonAug 23, 2025
To fix the issue, check the IP address using the interactive menu on the CU: ‘LAN setup/IP address setup/IP address’. Use this IP address in the browser. Ensure that the CU 6110 is connected to the same network as the PC. Verify the LAN cables are working properly.

System Type	Digital Conference System
Microphone Type	Gooseneck microphone
Connectivity	RJ-45 Ethernet
Power Supply	PoE (Power over Ethernet)
Features	Voting, Interpretation
Connector Type	XLR and RJ-45
Color	Black

System Type

Digital Conference System

Microphone Type

Gooseneck microphone

Connectivity

RJ-45 Ethernet

Power Supply

PoE (Power over Ethernet)

Features

Voting, Interpretation

Connector Type

XLR and RJ-45

Color

Black

Shure DCS 6000 - User Manual

Table of Contents

Other manuals for Shure DCS 6000

Questions and Answers

Summary

Important Product Information

Important Safeguards

DIS-CCU Central Control Unit

Overview

Key Features

Feature Licenses

License File Purchasing

Adding the License to the DIS-CCU

Select the System Mode

Mode Selection Methods

DIS-CCU Hardware Description

Front Panel Controls

Back Panel Ports

Simplified Audio Diagram

Menu Navigation

Connecting DCS-LAN Equipment

Connecting Microphone Units

DCS 6000 Cable Requirements

Connection Diagrams

Basic Setup

Computer Control Setup

Interpretation Unit Overview

Emergency Signal Setup

Power Requirements for Units

Supported Unit Capacities

Installing Large Systems

Additional Power Supplies

System Setup

Web Interface Overview

Accessing the System Interface

Assigning Network Address

Microphone Control Interface

Security Features

Browser Interface Protection

Assigning Names and Seat Numbers

Audio Settings

Floor Mix Configuration

Routing Microphones to Groups

Headphone Channel Usage

Loudspeaker;Headphone Audio Sources

Emergency Audio Signal Connection

Participant Microphone Settings

Microphone Operation Modes

Managing Active Microphones

Interrupt Mode Configuration

Voice Detection Settings

Language Interpretation System

Setting Up Interpretation Channels

Interpretation Settings

External Controller Commands

Protocol Behavior

Command Structure (Input)

Command Structure (Output)

Seat Numbering

Command Replies

Voting Control Options

Voting Results Reporting

Microphone Control Commands

External Commands to CCU

Microphone Command Reference

Set Max Speaker;Delegate Counts

Set Operation and Interrupt Modes

Set Microphone Priority

Retrieve System Status

Audio Control Commands

External Audio Control Commands

Loudspeaker Volume Control

Line Input Level;Gain Control

Line Output Volume and Audio Path

Microphone Attenuation Settings

Voting Commands

External Voting Control

Starting Voting Sessions

Stopping;Cancelling Voting

Troubleshooting Guide