120
MARANTEC
1. Connect the two RCs via the storage plug (1) included in the
delivery.
2. Operate the existing RC and keep the button pressed. LED
on the RC lights up.
3. Press the desired button on the new RC while holding the
button on the existing RC.
After 1-2 seconds, LED of the new RC lights up steadily.
Programming is complete. The new RC has memorised the
coding of the existing RC.
4. Remove the storage plug (1).
DIGITAL 302 433
Cod. 6901035
DIGITAL 304 433
Cod. 6901048
Compatible with DIGITAL 2, DIGITAL 4 RCs
i s t r u z i o n i p e r l a d u p l i c a z i o n e
433.92 MHz
Fix code
DUPLICABLE THROUGH UNIVERSAL RCs
EVO
LITE
To Next Page
Loading...