92
ZEN2
Cod. 6901071
ZEN4
Cod. 6901073
Compatible with GOL4C, LP2, ZEN2B, ZEN2G, ZEN2R, ZEN2W, ZEN2Y RCs
DITEC ENTREMATIC
The duplication process should be carried out in the
immediate proximity of the receiver CU.
1. Press and hold both source RC buttons for about 3 seconds.
2. When LED has steady light, release both buttons.
3. Press both source RC buttons again simultaneously for
another 3 seconds. LED will flash quickly for about 2
seconds.
4. Within 10 seconds press the button you want to memorise
on the new RC.
433.92 MHz
Rolling code/128 BIT
DUPLICABLE THROUGH UNIVERSAL RCs
Warning! The Zen RC in AES configuration is not compatible with our RCs.
EVO
LITE
To Next Page
Loading...