147
SEA
The duplication process should be carried out in the
immediate proximity of the receiver CU.
1. Open the already stored RC and press button 5 (as in the
picture) and release.
2. Within 18 seconds press the button of the new RC you want
to memorise.
If the two buttons of the already working RC are stored in the CU
in the new RC, both buttons will be memorised.
If the process is not successful or if errors are made during
programming, wait 20 seconds and start the programming
process again from point 1.
HEAD 2 433 ROLL
Cod. 6901206
HEAD 4 433 ROLL
Cod. 6901207
Compatible with SEA HEAD 433 OLD, SMART, SMART DUAL, COCCINELLA RCs
433.92 MHz
Rolling code
DUPLICABLE THROUGH UNIVERSAL RCs
EVO
To Next Page
Loading...