65
TM4
Cod. 6901139
Compatible with APRIMATIC TR2 and TR4 RCs
APRIMATIC
The duplication process should be carried out in the
immediate proximity of the receiver.
1. Press all the buttons on the original RC simultaneously. The
sound on the receiver will be activated indicating that it is
ready to learn a new RC.
2. Press all buttons on the new RC at the same time. The
sound indication on the receiver stops for a moment
(approx. 1.5 sec) and then resumes. Release the buttons.
3. Now press any button on the new RC. The sound is
interrupted for a moment (approx. 1.5 sec) and then
resumes.
IMPORTANT NOTE:
If the buttons are not pressed at the same time, the receiver
does not recognise the new RC.
433.92 MHz
Rolling code
DUPLICABLE THROUGH UNIVERSAL RCs
EVO
LITE
To Next Page
Loading...