66
TX4 114253
Cod. 6901393
Compatible with AVIDSEN 104251, AVIDSEN 104250 OLD2, AVIDSEN 104250 RED, TX4 104257 RCs
AVIDSEN
To enable a new radio remote control you need to intervene
directly on the receiving card in order to access the
programming buttons.
1. Open the radio receiver box and press the recording button
located on the radio receiver card which is called: ENR,
MEMO, PROG, REC according to the model.
2. LED on the radio board will flash.
3. Press and hold the button for one second on the new RC.
4. Release the button: LED on the card will go out immediately.
433.92 MHz
Rolling code
DUPLICABLE THROUGH UNIVERSAL RCs
EVO
LITE
To Next Page
Loading...