51
DUPLICATION PROCESSES
NEW PRINZ
QUARTZ-EQUIPPED 26 - 40,685 MHz
Cod. 6900304
with plug-in quartz
Cod. 6900387 with plug-in quartz 30.875 MHz
Cod. 6900390 with plug-in quartz 30.900 MHz
Best position
for duplication
QUARTZ-EQUIPPED
Self-learning
BUTTON 1 BUTTON 2
Press and hold the Prinz button 1 and
simultaneously press 4 times button 2.
(Warning! Do not release button 1)
x4
LED flashes 3 times slowly and
then switches to fast flashing
Press and hold the Prinz button 1 and
simultaneously press 4 times button 2. Keeping
button 1 pressed, press button 2 and release
button 1.
(Warning! Do not release button 2)
x4
the LED flashes 3 times slowly
and then switches to fast
flashing
bring the source remote control closer and
press the button that you want to duplicate
until LED switches to fixed light steady
confirm correct learning
bring the source remote control closer and
press the button that you want to duplicate
until LED switches to steady light to confirm
correct learning
insert the quartz, where necessary,
with the same frequency as the remote
control to be duplicated
keep pressing a button and adjusting
the signal strength with the
appropriate tool
Intensity adjustment tools
(please use a ceramic screwdriver)
FOR FULL INSTRUCTIONS
visit our website sicetech.it
Process to be performed
for model 6900304 only
1 1
2 2
3 3
To Next Page
Loading...