101
FADINI
1. Press and release the first two buttons of the new RC
simultaneously; LED will flash twice.
2. Press and release the first two buttons of the new RC at the
same time; LED will flash 3 times.
3. LED of the new RC will remain on for about 4 seconds: this
is the time to complete the operation.
4. Press the first two buttons of the source RC simultaneously
until the new RC LED flashes and goes out.
VIX 53/4 GREY Rolling code/Rolling code 128 BIT
Cod. 6901705
868.35 MHz
Rolling code
To Next Page
Loading...