132
NORMSTAHL
To enable a new RC it is necessary to intervene directly on the
receiving card to access the programming buttons.
1. Press and release the PROG button on the receiving card;
one green and one red LED will light up.
2. Press the new RC button; LEDs on the card will turn o and
then on.
3. Press the same button on the new RC again; LEDs will turn
o and then on again.
RCU 433 4K
Cod. 6901411
Compatible with NORMSTAHL T433-4, CRAWFORD EA433 4K, CRAWFORD T433-4 RCs
433.92 MHz
Rolling code
DUPLICABLE THROUGH UNIVERSAL RCs
EVO
LITE
To Next Page
Loading...