131
NICE
Duplication process with a similar BD RC (double-direction).
1. Place the working RC in front of the new RC (as in the
picture).
2. On the new RC, press and release the button you want to
memorise. The RC LED on the new RC will start flashing.
3. Now press the button you want to copy on the working RC.
At the end of the code transfer, for a while, both RCs will
vibrate to confirm duplication.
Duplication process with a compatible Nice RC (one-direction).
The duplication process should be carried out in the
immediate proximity of the receiver.
1. Press for about 7 seconds the button you want to encode on
the new RC.
2. Press the operating RC button 3 times in succession.
3. Press the new RC button again.
ON3EBD
Cod. 6900902
Compatible with NICE ONE, FLOR-S, FLO2RE, ON2E, INTI RCs
433.92 MHz
Rolling code
To Next Page
Loading...