109
GIBIDI
The duplication process should be carried out in the
immediate proximity of the receiver CU.
1. Press buttons 1 and 2 of the RC already operating in receiver
for about 5 seconds and then press button 1 of the new RC
for a few seconds.
If the process is not successful or if errors are made during
programming, wait 20 seconds and start the programming
process again from point 1.
DTS4334-AUO400
Cod. 6900969
Compatible with AU3000E Domino, AU1680, AU1600, AU1610 E AU1810 RCs
433.92 MHz
Rolling code
DUPLICABLE THROUGH UNIVERSAL RCs
EVO
LITE
To Next Page
Loading...