161
STAGNOLI
To enable a new RC it is necessary to intervene directly on the
receiving card to access the programming buttons.
1. To memorise the new RC, press the programming button
(PG) twice, extending the last pressure.
2. LED 1 above the PG button will flash twice.
3. Press the button of the new RC to memorise.
4. When the new transmitter is memorised, LED 1 will light
steady for a few moments. To memorise other RCs, repeat
the operation from point 1.
Warning: RC Stagnoli Venus AV223 is not compatible with the
old model Stagnoli Venus AV 221. To distinguish the two RCs, pay
attention to the rubber finish not featured in the new RC Venus
AV223.
VENUS A 223
Cod. 6901305
VENUS A 221
Cod. 6901300
433.92 MHz
Rolling code
DUPLICABLE THROUGH UNIVERSAL RCs
EVO
LITE
To Next Page
Loading...