100
FAAC
Duplication requires MASTER* RC
1. Position the already operating RC and the new one head to
head.
2. Press the button to copy of the RC already working in the
receiver and keep it pressed; then press the button of the
new RC and keep it pressed; you will notice a short flashing
of the new RC to indicate that duplication was successful.
3. Repeat the process for all buttons.
If the process is not successful or if errors are made during
programming, wait 20 seconds and start the programming
process again from point 1.
XT2 433 SL
Cod. 6901700
XT4 433 SL
Cod. 6901701
Compatible with FAAC TML2 433SLR, FAAC TML4 433SLR RCs
433.92 MHz
Fix code
EVO
LITE
DUPLICABLE THROUGH UNIVERSAL RCs
To Next Page
Loading...