25
x4
press and hold button 1
and meanwhile
press 4 times button 2
LED flashes
every 2 sec.
LED flashes fast
press the button
where you want
to memorise the code
ROLLING SIMPLE
ROLLING COMPLEX (BFT MITTO)
ROLLING COMPLEX (FAAC)
IMPORTANT: CHECK THAT THE REMOTE CONTROL TO BE COPIED IS A MASTER.
By pressing any button, LED must emit a double flash instead of turning on immediately with a steady light.
x4
press and hold button 1
and meanwhile
press 4 times button 2
LED flashes
every 2 sec.
LED flashes twice LED flashes fast
press the button
where you want
to memorise the code
x4
press and hold button 1
and meanwhile
press 4 times button 2
LED flashes
every 2 sec.
LED flashes twice fast LED flashes fast
press the button
where you want
to memorise the code
press the button
to copy
press the button
to copy
press buttons 1 and 2 of the
BFT transmitter (source code)
simultaneously **
press the button
to copy
while LED is flashing,
press the button
to copy
press both buttons
together and release
them when LED flashes
*See compatibility list
**In older versions, using one
pin press the hidden button at the back
of the transmitter
RECEIVER INSERTION
PROCEDURE*
RECEIVER INSERTION
PROCEDURE*
DIRECT FUNCTION
RECEIVER INSERTION
PROCEDURE
COMPATIBLE RCs
COMPATIBLE RCs
WHY SYNC TECHNOLOGY
ACTION ON RECEIVER
REQUIRED
WHY SYNC TECHNOLOGY
ACTION ON RECEIVER
REQUIRED
21
3
4 5
21
3
5 6
21
3
4
4 5
6 7
To Next Page
Loading...