SICE Tech WHY TOUCH PRO - Page 30

39
x4
x4
press and hold button 3
and meanwhile
press 4 times button 4
press and hold button 3
and meanwhile
press 4 times button 4
LED flashes
press buttons 1 and 2 of the
BFT transmitter (source code)
simultaneously**
**In older versions,
using one
pin press the hidden
button at the back
of the transmitter.
LED flashes twice fast
to indicate waiting
for the code to be copied
press and hold the
button to copy
ROLLING SIMPLE
ROLLING COMPLEX (BFT MITTO)
*See compatibility list
RECEIVER INSERTION
PROCEDURE*
WHY SYNC TECHNOLOGY
DIRECT FUNCTION
ACTION ON RECEIVER
REQUIRED
RECEIVER INSERTION
PROCEDURE
WHY SYNC TECHNOLOGY
ROLLING COMPLEX (APRIMATIC)
x4
press and hold button 3
and meanwhile
press 4 times button 4
RECEIVER INSERTION
PROCEDURE
WHY SYNC TECHNOLOGY
LED flashes
press and hold the
button to copy
LED flashes fast
within 5 seconds press
and release the button
on which you want to
memorise the code
LED will flash again (point
2) allowing further copies
to be made
LED will light up steady for
a few seconds to confirm
the correct conclusion of
the process
LED flashes fast
entro 5 secondi premere e
rilasciare il tasto sul quale
si desidera inserire il codice
LED will light up steady for
a few seconds to confirm
the correct conclusion of
the process
LED will light up steady for
a few seconds to confirm
the correct conclusion of
the process
LED flashes
press all buttons of the
RC (source code)
simultaneously**
LED flashes twice fast
to indicate waiting
for the code to be copied
press and hold the
button
to copy
LED flashes fast, so within 5
seconds press and release the
button on which you want to
memorise the code
LED will flash again
(point 2) allowing further
copies to be made
LED will light up steady for a few seconds to
confirm the correct conclusion of the process
COMPATIBLE RCs
21 3 5 64
2
1
3 4
65 7
21 3 4 5 6