SICE Tech WHY TOUCH PRO - Page 54

68
TO.GO 2 VA
Cod. 6904209
TO.GO 4 VA
Cod. 6904211
Compatible with BENINCA IRI VA, IRI AK, TO.GO 2 WV, TO.GO 4 WV, HAPPY 2VA, HAPPY 4VA RCs
BENINCÀ
The remote control is supplied with 128bit coding. To change the encoding type press buttons 1
and 2 simultaneously for 20 seconds.
After a few seconds LED will start flashing, indicating the learning mode that is about to be
activated:
2 flashes and pause of 1 second:
the transmitter is about to be configured as HCS
3 flashes and pause of 1 second:
the transmitter is about to be configured as ARC; when LED lights up with a steady light, the
transmitter has changed mode.
Remote learning in One WB/WI Receivers
The procedure must be carried out close to the recipient
• Press the hidden button of the memorised transmitter, i.e. the simultaneous combination
of buttons T1 and T2 for 3 seconds (the red LED on the transmitter starts flashing).
• Within 5 seconds press the button of the transmitter already memorized corresponding to
the channel to be associated with the new transmitter.
• Press the button of the new transmitter to be associated to the chosen channel within 5
seconds.
• The receiver exits programming: check the correct functioning of the new memorized
transmitter.
Remote Learning in Embedded Receivers in Control Centres
The procedure must be carried out close to the receiver
• Press the hidden button of the memorized transmitter (the red LED of the transmitter
starts flashing).
• Press within 5 seconds the button of the transmitter already memorized corresponding to
the channel to be associated with the new transmitter.
• Press the hidden button of the transmitter to be memorized (the red LED of the transmitter
starts flashing).
• Press the button of the new transmitter to be associated to the chosen channel within 5
seconds.
• The receiver exits programming: check the correct functioning of the new memorised
transmitter.
433.92 MHz
Rolling code/128 BIT
DUPLICABLE THROUGH UNIVERSAL RCs
Warning: RC To.Go has ARC configuration and is not compatible with our RCs.
LITE