SICK C4000 Standard

Chapter 8 Operating Instructions
C4000 Standard/Advanced
66 © SICK AG • Industrial Safety Systems • Germany • All rights reserved 8009861/WA65/2012-06-12
Subject to change without notice
Configuration
8 Configuration
8.1 Default delivery status
As delivered the C4000 is configured ready for protective operation. The C4000 Standard
w
ithout extension connection is also available as an option with the pre-configurations C,
D, E, F and R. You can change the pre-configuration at any time with the aid of the CDS.
C4000 Standard with
pre@configuration …
Function that can be
configured
C4000
Standard
C4000
Advanced
C D E F R
Restart interlock External External External Internal External
External device
monitoring (EDM)
Deacti-
vated
Deacti-
vated
Activated Deactivated
Beam coding Non-coded Non-coded Non-coded
Blanking None None None
Guaranteed scanning
range
0-2.5 m or 0-6 m  
2-8 m or 5-19 m 
Function that can be
configured
C4000 Standard Guest C4000 Advanced Guest
Beam coding Non-coded Non-coded
Blanking None None
Guaranteed scanning
range
0-2.5 m 0-6 m
0-2.5 m or 0-6 m 
2-8 m or 5-19 m
8.2 Preparing the configuration
How to prepare the configuration:
 Make sure that the safety light curtain has been correctly mounted and that the elec-
trical connections are correct and in place.
 Plan all required settings (operating mode, beam coding, resolution, cascading etc.)
To configure the safety light curtain, you need:
 CDS (Configuration & Diagnostic Software) on CDCROM
 user manual for CDS on CDCROM
 PC/Notebook with Windows NT/2000/XP/Vista and a serial interface (RSC232).
PC/Notebook not included
 connecting cable for connecting PC and C4000 (SICK part number 6021195)
 To configure the device, please read the user manual for the CDS (Configuration &
Diagnostic Software) and use the online help function of the programme.
Tab.
22
:
Default delivery
status of the C4000
Tab.
23
:
Default delivery
status of the C4000 Guest