SICK C4000 Standard

Operating Instructions Chapter 5
C4000 Standard/Advanced
8009861/WA65/2012-06-12 © SICK AG • Industrial Safety Systems • Germany • All rights reserved 49
Subject to change without notice
Installation and mounting
5.2.3 Mounting the C4000 Guest with side bracket
 Attach the bolts of the side bracket with a torque of between 5 and 6 Nm. Higher
torques can damage the bracket; lower torques provide inadequate protection against
vibration.
 When mounting the bracket, note the distance and the position of the sliding nuts as
described in chapter 11.5.5 “C4000 Standard/Advanced Guest” on page 88.
 When mounting the side bracket ensure that the bolts marked  and  remain
accessible, allowing you later to adjust and lock the light curtain in position.
Notes
Fig.
30
:
Mounting the
C4000
with side bracket
Notes
Sliding nuts

