Complementary information
In man
y cases, the optional AR60 laser alignment aid and the alignment tool available
as an accessory can make alignment even easier. If deflector mirrors are installed, the
laser alignment aid can be used at the receiver. If there is a large protective field height,
it can be used at the top end of the sender and at the receiver.
Since the optional AR60 laser alignment aid is placed with the adapter inside the
protective field of the safety light curtain, at most diagnostic LEDs 1 and 2 light up blue
and the OSSD LED lights up red. To check whether the OSSD LED of the receiver lights
up green and diagnostic LEDs 5,6,7 and 8 light up blue, remove the optional AR60
laser alignment aid.
Further topics
•
"Indic
ation of the alignment quality", page 106
•
"Mounting", page 66
•
"Laser alignment aid", page 51
8.4.2 Alignment with the QuickFix bracket
Prerequisites
•
T
he sender and receiver are mounted with a QuickFix bracket
Alignment with the QuickFix bracket
T
he QuickFix bracket offers you the following adjustment options for aligning the sender
and receiver with each other:
•
Shift vertically
Figure 59: QuickFix bracket: adjust vertically
8.4.3 Alignment with the FlexFix bracket or with the upgrade bracket
Prerequisites
•
A F
lexFix bracket or upgrade bracket is used to mount the sender and receiver.
COMMISSIONING 8
8023872/18YZ/2021-01-14 | SICK O P E R A T I N G I N S T R U C T I O N S | deTec4 Ex II 3GD
105
Subject to change without notice
To Next Page
Loading...
