Diagnostic data
T
he following diagnostic data can be displayed in an NFC-capable device:
•
Device-specific information of the protective device, e.g. name, serial number, type
code
•
Information about the configuration, e.g. whether the restart interlock is activated
or a reduced resolution is used
•
Current status of the protective device, e.g. status of the OSSDs, muting status,
quality of the alignment
•
Error diagnostics with specification of the error code, error description, diagnostic
LED and error correction
An NFC-capable antenna is integrated behind the front screen of the safety light curtain
for transmitting the data. The area is marked with the NFC-symbol.
Figure 4: NFC symbol
1
)
To be able to call up information for diagnostics and configuration, you need an NFC-
capable device, e.g. a smartphone and the app provided by SICK.
b
Hold the NFC-capable mobile device near the marked NFC-area on the lower end
of the receiver to call up the diagnostic data.
3.2.17 System plug
Overview
T
he following system plugs are available for the safety light curtain:
•
SP1 system plug
•
SP2 system plug
The system plugs differ in functional scope.
Table 3: Functional scope
Functions SP1 system plug SP2 system plug
Beam coding
✓ ✓
Restart interlock
✓ ✓
External device monitoring
(EDM)
✓ ✓
Application diagnostic output
✓ ✓
Cascade
✓ ✓
IO-Link
✓ ✓
reduced resolution –
✓
Dynamic protective field width –
✓
smart presence detection –
✓
Muting –
✓
Partial blanking –
✓
The SP1 system plug can be used on all of the senders and receivers of a single system
or on a hos
t–guest system.
1)
T
he N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries.
PRODUCT DESCRIPTION 3
8023872/18YZ/2021-01-14 | SICK O P E R A T I N G I N S T R U C T I O N S | deTec4 Ex II 3GD
17
Subject to change without notice
To Next Page
Loading...
