EasyManua.ls Logo

SICK deTec4 Ex II 3GD - Flexible Control Cabinet Cabling and Status Indication on both Sides

SICK deTec4 Ex II 3GD
156 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Table 6: Use of system plugs in a cascade
SP1 system plug type code SP2 system plug type code
1000 1100 1300 2100 2300
Host Sender
1)
Receiver
F
unctions at the
host
Beam coding
Functions at the
host
Beam coding
Restart inter‐
lock
External device
monitoring
Application
diagnostic out‐
put
Functions at the
host
Beam coding
Reduced reso‐
lution
Dynamic pro‐
tective field
width
Smart pres‐
ence detection
Functions at the
host
Beam coding
Reduced reso‐
lution
Dynamic pro‐
tective field
width
Restart inter‐
lock
External device
monitoring
Application
diagnostic out‐
put
Smart pres‐
ence detection
First guest
(
for cascade
with 2 guest
devices)
Sender
Receiver
Last guest Sender
2)
Receiver
F
unctions at the
last guest
External device
monitoring
Restart inter‐
lock
Application
diagnostic out‐
put
IO-Link
System plug suitable.
System plug not suitable. An SP1 system plug must be used on the receiver of a guest system as well as on the sender of a host system
and gue
st system.
1)
At the sender, the 8-pin system connection is solely for the purposes of providing standardized wiring. It is particularly recommended if the
8-pin system connection at the receiver is used and the sender and receiver are connected to each other via a T-connector.
2)
If a sender does not have an additional guest connected to it, the extension connection has no function and must be sealed with a
protective cap.
3.2.18 Flexible control cabinet cabling and status indication on both sides
The safety light curtain can be connected to the control cabinet in different ways as
r
equired:
Separate connecting cables for sender and receiver
Separate connecting cables for sender and receiver with connection in the control
cabinet
Connection of sender and receiver via a T-connector, shared 5-pin or 8-pin con‐
necting cable to the control cabinet
3 P
RODUCT DESCRIPTION
20
O P E R A T I N G I N S T R U C T I O N S | deTec4 Ex II 3GD 8023872/18YZ/2021-01-14 | SICK
Subject to change without notice

Table of Contents

Related product manuals