Alignment with the FlexFix bracket or the upgrade bracket
T
he FlexFix bracket or upgrade bracket offer you the following adjustment options for
aligning the sender and receiver with each other:
•
Shift vertically
•
Rotate (± 15°)
Figure 60: FlexFix bracket: adjust vertically/rotate
NOTE
R
ecommendation for aligning a long device so that it rotates uniformly in both brackets:
b
Grab the alignment device roughly in the center between the two brackets.
8.4.4 Indication of the alignment quality
Important information
NOTE
A
s soon as the diagnostic LEDs 1, 2 and 3 light up, the alignment is good and availabil‐
ity is stable.
Body parts or objects in the protective field (e.g., hand, tool, AR60 optional laser
alignment aid) may impair the indication of the alignment quality (at most diagnostic
LEDs 1 and 2 light up).
b
Ensure that no body parts or objects are in the protective field
Or
b
W
atch out for diagnostic LEDs 5, 6, 7 and 8. If diagnostic LEDs 5, 6, 7 and 8 light
up, the alignment is good and availability is stable.
Indication of the alignment quality
Position of LEDs: see "R
eceiver indicators", page 22.
8 C
OMMISSIONING
106
O P E R A T I N G I N S T R U C T I O N S | deTec4 Ex II 3GD 8023872/18YZ/2021-01-14 | SICK
Subject to change without notice
To Next Page
Loading...
