Diagnostic LEDs Color Configuration
3
O W
hite
Beam coding is configured.
4
O W
hite
Restart interlock is configured.
5
O W
hite
Muting is configured.
6
O W
hite
Reduced resolution is configured.
7
O W
hite
Dynamic protective field width is configured.
8
O W
hite
Reserved
o LED of
f. Ö LED flashes. O LED illuminates.
Table 9: Indication of the alignment quality
Diagnostic LEDs Color Meaning
1 ... 4
O Blue
Indication of the alignment quality.
If onl
y one diagnostic LED lights up, the align‐
ment is insufficient. If all 4 diagnostic LEDs
light up, the alignment is excellent.
5, 6
O Blue
The topmost beam (far from system plug) is
s
ynchronized.
7, 8
O Blue
The bottommost beam (near system plug) is
synchronized.
o LED of
f. Ö LED flashes. O LED illuminates.
Table 10: Fault indicator
Diagnostic LEDs Color Meaning
1 ... 8
O R
ed
A red illuminated diagnostic LED signals the
f
unction at which an error has occurred.
1 ... 8
Ö R
ed
A red flashing diagnostic LED signals the rea‐
son f
or the error.
o LED of
f. Ö LED flashes. O LED illuminates.
Example: If diagnostic LED 1 lights up red and diagnostic LED 5 flashes red, there is an
EDM er
ror.
Table 11: Warnings
Diagnostics LED Color Meaning
1 ... 8
O Y
ellow
A yellow illuminated diagnostic LED signals
whic
h function is affected.
1 ... 8
Ö Y
ellow
A yellow flashing diagnostic LED signals the
r
eason for the warning.
o LED of
f. Ö LED flashes. O LED illuminates.
Example: If diagnostic LED 5 lights up yellow and diagnostic LED 3 flashes yellow, the
sensor g
ap monitoring was exceeded.
Further topics
•
"Dia
gnostic LEDs", page 115
PRODUCT DESCRIPTION 3
8023872/18YZ/2021-01-14 | SICK O P E R A T I N G I N S T R U C T I O N S | deTec4 Ex II 3GD
23
Subject to change without notice
To Next Page
Loading...
