SICK deTec4 Ex II 3GD - Page 74

!
"
§
Figure 40: Mounting the FlexFix bracket to a profile frame
Approach
1.
After assembling the FlexFix brackets, screw the sender or receiver into the FlexFix
brackets from the front. (!)
2.
Align the sender and receiver. (")
3. Use an M5 screw to secure the position of the sender and receiver in the FlexFix
bracket. (§)
! " §
Figure 41: Inserting the safety light curtain in the FlexFix brackets
5 MOUN
TING
74
O P E R A T I N G I N S T R U C T I O N S | deTec4 Ex II 3GD 8023872/18YZ/2021-01-14 | SICK
Subject to change without notice