SICK deTec4 Ex II 3GD - Page 81

Pin Wire color
1)
s S
ender r Receiver
3 Green Not assigned ADO (application diagnostic
output)
4 Yellow Not assigned EDM (external device moni‐
t
oring input)
5 Gray In2 (laser alignment aid
button)
OSSD1
6 Pink In1
(laser alignment aid
switch/cascade synchro‐
nization input)
OSSD2
7 Blue 0 V DC (voltage supply
in
put)
0 V DC (voltage supply
input)
8 Red Com1
(Single system or host:
sender/receiver communi‐
cation)
Com1
(Single system or host:
sender/receiver communi‐
cation)
1)
Applies to the extension cables recommended as accessories.
Table 21: System connection pin assignment for SP2 system plug (M12 male connector, 8-pin)
PIN Wire color
1)
r Receiver
1 White In3
RES (reset pushbutton
input) or override (override
input)
2 Brown +24 V DC (voltage supply
in
put)
3 Green ADO (application diagnostic
output)
4 Yellow In4
EDM (EDM input) or muting
signal 1
5 Gray OSSD1
6 Pink OSSD2
7 Blue 0 V DC (voltage supply
in
put)
8 Red Com1
(Single system or host:
sender/receiver communi‐
cation)
1)
Applies to the connecting cables recommended as accessories.
Further topics
•
"Int
egration in electrical control", page 46
ELECTRICAL INSTALLATION 6
8023872/18YZ/2021-01-14 | SICK O P E R A T I N G I N S T R U C T I O N S | deTec4 Ex II 3GD
81
Subject to change without notice