SICK DL100 Pro EtherNet/IP - Page 62

Attribute ID Name Description Min. ... Max.
Default
Data
type
Size
[bytes]
Access
121 [MF1] Function Select MF1 function.
Options:
•
0: OUTPUT_DISTANCE_THRESHOLD (see
attribute 128, 129)
•
1: OUTPUT_VELOCITY_THRESHOLD (see
attribute 130, 131)
•
2: OUTPUT_SERVICE (see attribute
122...127)
•
3: INPUT_LASER_OFF
•
4: INPUT_PRESET_STATIC (see attribute
132) Parameterization of the associated
reference value via [MF1] Input Preset
(attribute 132) see "Preset – move to initi‐
alization position", page 66
0...4
1
USINT 1 Set
122 [MF1 Service]
Plausibility
Activate MF1 for plausibility warning / error.
Options:
•
0: DISABLED
•
1: ENABLED
0...1
1
BOOL 1 Set
123 [MF1 Service]
Temperature
Activate MF1 for temperature warning / error.
Options:
•
0: DISABLED
•
1: ENABLED
0...1
1
BOOL 1 Set
124 [MF1 Service]
Level
Activate MF1 for level warning / error.
Options:
•
0: DISABLED
•
1: ENABLED
0...1
1
BOOL 1 Set
125 [MF1 Service]
Laser
Activate MF1 for laser warning / error.
Options:
•
0: DISABLED
•
1: ENABLED
0...1
1
BOOL 1 Set
126 [MF1 Service]
Not Ready
Activate MF1 for absence of operational
readiness.
Options:
•
0: DISABLED
•
1: ENABLED
0...1
1
BOOL 1 Set
127 [MF1 Service]
Heater active
Activate MF1 when device-internal heating is
in operation.
Options:
•
0: DISABLED
•
1: ENABLED
0...1
0
BOOL 1 Set
128 [MF1 Output]
Threshold Posi‐
tion
Switching threshold for distance value [mm] -300,000...
300,000
1990
DINT 4 Set
129 [MF1 Output]
Hysteresis
Hysteresis for switching threshold of distance
value [mm]
1...300,000
10
UDINT 4 Set
130 [MF1 output]
velocity threshold
Switching threshold for speed value [mm/s] 50...15,000
5000
INT 2 Set
10 ETHERNET/IP INTERFACE
62
O P E R A T I N G I N S T R U C T I O N S | DL100 Pro EtherNet/IP 8016994/19HB/2022-03-15 | SICK
Subject to change without notice