SICK MCS200HW

4.3.3 Digital outputs
4.3.4 Digital inputs
4.3.5 Modbus outputs
4.3.6 Modbus inputs
4.3.7 Modbus
4.3.8 OPC outputs
4.3.9 LAN
4.3.10 Hardware plan (CAN)
4.4 Date and time Set date and time.
4.5 Device information Displays device information.
5 Measuring Screen Displays individual preset Measuring
Screens.
5.1 Measuring Screen 1
5.2 Measuring Screen 2
5.3 Measuring Screen 3
5.4 Measuring Screen 4
5.5 Measuring Screen 5
5.6 Measuring Screen 6
5.7 Measuring Screen 7
5.8 Measuring Screen 8
6 Maintenance
6.1 Maintenance signal Switch Maintenance signal on and off.
6.2 Restart Restart the device.
6.3 Data backup
6.3.1 Backup
6.3.2 Restore
6.4 Protocol Tile “Edit” allows entries by operator
and maintenance personnel.
6.5 Functions Trigger sequences and states.
•
A sequence can be started from any
state except standby.
•
States must be terminated or
changed actively.
6.6 Reset
6.6.1 Confirm active messages
7 Settings Tile “Edit” serves to make settings.
9 MENUS
44
O P E R A T I N G I N S T R U C T I O N S | MCS200HW 8021889/1D1T/V3-1/2021-09 | SICK
Subject to change without notice