SICK MCS200HW

Sample gas at the sampling point Property
Sample gas temperature subassem‐
bly:
•
Sample gas probe
•
Sample gas line
•
Cell
Temperature:
•
Approx. 180 °C
•
Approx. 180 °C
•
Approx. 60 °C
Process pressure –200 ... +200 hPa relative
Dust load < 200 mg/m
3
13.2.9 Connections in analyzer
13.2.9.1 Power supply - connection / fuses
Overview
The power supply is located on the left on the analyzer.
UPS
Power supply - connections
Table 23: Power supply - connections
Name Supply
MAINS UPS (3-pole) Power supply for electronics unit (internal)
MAINS (5-pole) External power supply
F1 Internal
F2 Internal
Table 24: Connection terminal - power voltage connection on the analyzer
Wire Cross-section in
mm
2
Cross-section in
AWG
Tightening torque Nm
rigid 0.75 ... 10.0 18 ... 8
1.2 ... 1.5
flexible with ferrules 0.5 ... 6.0 18 ... 8
flexible with ferrules with insu‐
lating collar
0.5 ... 6.0 18 ... 8
13.2.9.2 Electronics fuses
Overview
13 TECHNICAL DATA
66
O P E R A T I N G I N S T R U C T I O N S | MCS200HW 8021889/1D1T/V3-1/2021-09 | SICK
Subject to change without notice